K & E Distributing

MVS 98 Multi VS Installation and Commissioning (DSM-IA)
2021-04-20 08:30 - 2021-04-21 11:30, 2020-09-15 08:30 - 2020-09-16 11:30 UTC | Gordon Peterson Training Academy, 400 15th St, Dallas Center, IA, 50063, United States
Multi V S Installation and Commissioning
Who should attend? Employees and sub-contractors of our Representative or Distributor partners who will be engaging in field installation and commissioning of LG Multi V S equipment.
What you will learn: The manufacturer’s guidelines for installing the piping and wiring systems connected to the indoor and outdoor LG Multi V S air conditioning equipment. Also, the practical skills necessary to perform an external authorized commissioning of LG Multi V S systems. Special focus will be spent on understanding how to use LGMV for the commissioning process.
How you will learn: This class begins with a brief introduction to LG Electronics followed by lectures about product installation (Emphasis is placed on piping and control wiring.) Consideration and discussions covering pre-commissioning tasks that must be completed. The student will be guided through the steps of the commissioning process by classroom lecture and reinforcement of lessons by practical exercise in our live equipment lab. During lab activities students will be introduced to LGMV (LG Monitoring View Software) which is the tool that must be used to evaluate equipment performance.
Prerequisites: 1) Advanced technical knowledge of commercial A/C, heat pump, and applied systems. 2) Basic working knowledge of Microsoft Office programs including Excel, Power Point and Word. 3) Latest version of LATS must be installed on your PC – you can obtain LATS from your local Rep. 4) Latest version of LGMV software must be installed on your computer.
Duration: 1.5 Days Meals: Lunch will be served the first day
Cost: $150/Student. Billable to your K&E Distributing Account.
When to arrive and depart: Start and end times are subject to change for each academy. Please consult the calendar website for the timing of your particular course at time of registration. All other published times are always superseded by those listed in the course description on the website.
Students should contact their REPRESENTATIVE to order the LGMV software and cable – PRCTSL1 and PRCTFE1 LGMV Kit the LGMV cable and installation software are now also conveniently bundled into a single package for ordering. • PRCTIL0 – Cable and installation software; combines PRCTFE1 and PRCTSL1.Multi V S Installation and Commissioning
Register Here
Course qualifies for 8 hours of HVAC/R Discipline continuing education credits with the Iowa Plumbing and Mechanical Board.
Lunch provided for day 1.
Preferred Lodging Options:
Stoney Creek Hotel & Conference Center
5291 Stoney Creek Ct.
Johnston, IA 50131
515-334-9000
Fairfield Inn & Suites Des Moines West
7225 Vista Dr.
West Des Moines, IA 50266
515-225-6100
At this time, our upcoming course will take place as planned. However, if you are sick or feeling you are getting sick, we ask that you please stay home. Currently, older adults and persons with underlying health conditions are considered to be at increased risk of severe illness and complications from COVID-19. Examples of underlying health conditions include heart disease, lung disease, diabetes, people with weakened immune systems, and people who are pregnant. The CDC recommends that people in high-risk groups consult with their healthcare provider about attending any large gathering.
If you do choose to attend MVS 98, please keep in mind the CDC recommendations on how to keep yourself and others healthy:
Avoid close contact with people who are sick.
Avoid touching your eyes, nose, and mouth with unwashed hands.
Wash your hands often with soap and water for at least 20 seconds. Use an alcohol-based hand sanitizer that contains at least 60% alcohol if soap and water are not available.”

DFS-10 Service Essentials
2021-04-15 08:30 - 16:30, 2021-03-11 08:30 - 16:30, 2021-02-11 08:30 - 16:30
DFS-10 Service Essentials
Who should attend? Employees and sub-contractors of our Representatives / Distribution partners who will be engaging in the service and repair of LG DFS air conditioning equipment.
What you will learn: You will become familiar with LG DFS equipment PCBs, EEVs, BLDC Motors, compressors and other components. On a modular level the student will learn the part each component plays in a correctly operating LG DFS system. Indoor and outdoor electrical connections and interrelationships will be discussed. Physical access to all major functional components will be covered along with practical guidance concerning the service and maintenance of LG DFS equipment.
How you will learn: The student will be guided through the steps of the troubleshooting process by means of classroom lecture and reinforcement of lessons by practical hands on exercises on live equipment in the lab. During lab activities students will use LG SIM 2.0 (LG Monitoring View Software) to evaluate and troubleshoot LG DFS equipment in lab activities.
Prerequisites:
1) Advanced technical knowledge of Residential A/C, Heat Pump, and Air Distribution systems.
2) Basic working knowledge of Microsoft Office programs including Excel, Power Point and Word.
Duration: 7 Hours of instruction
Meals: Lunch will be served
Cost: $75/Student. Billable to your K&E Distributing Account.
When to arrive and depart: Start and end times are subject to change for each academy. Please consult the calendar website for the timing of your particular course at time of registration. All other published times are always superseded by those listed in the course description on the website.
LG SIM 2.0 & LGMV:
Students that are interested in the LG SIMS 2.0 or LGMV PC version should reach out to their Representative or Distributor, for the correct LG SIMS 2.0 or LGMV kit to order.
Laptop PC * running Windows Vista, 7, 8, 10 with a web browser of Internet Explorer 8.0
or higher with a minimum of Excel, Power Point, and Word installed.
*Students that want LGMV installed onto their PCRegister Here
Course qualifies for 7 hours of HVAC/R Discipline continuing education credits with the Iowa Plumbing and Mechanical Board.
Lunch provided for day 1.
Preferred Lodging Options:
Stoney Creek Hotel & Conference Center
5291 Stoney Creek Ct.
Johnston, IA 50131
515-334-9000
Fairfield Inn & Suites Des Moines West
7225 Vista Dr.
West Des Moines, IA 50266
515-225-6100
At this time, our upcoming course will take place as planned. However, if you are sick or feeling you are getting sick, we ask that you please stay home. Currently, older adults and persons with underlying health conditions are considered to be at increased risk of severe illness and complications from COVID-19. Examples of underlying health conditions include heart disease, lung disease, diabetes, people with weakened immune systems, and people who are pregnant. The CDC recommends that people in high-risk groups consult with their healthcare provider about attending any large gathering.
If you do choose to attend DFS10, please keep in mind the CDC recommendations on how to keep yourself and others healthy:
Avoid close contact with people who are sick.
Avoid touching your eyes, nose, and mouth with unwashed hands.
Wash your hands often with soap and water for at least 20 seconds. Use an alcohol-based hand sanitizer that contains at least 60% alcohol if soap and water are not available.”

DFS-04 Installation Essentials
2021-04-14 08:30 - 16:30, 2021-03-10 08:30 - 16:30, 2021-02-10 08:30 - 16:30, 2020-11-10 08:30 - 16:30, 2020-10-20 08:30 - 16:30, 2020-09-29 08:30 - 16:30, 2020-09-08 08:30 - 16:30, 2020-08-25 08:30 - 16:30
Who should attend? Employees and sub-contractors of our Representatives / Distribution partners who will be engaging in field installation of LG DFS equipment.
What you will learn: The manufacturer’s guidelines for installing the piping and wiring systems connected to the indoor and outdoor LG DFS air conditioning equipment.
How you will learn: This class begins with a brief introduction to LG Inverter equipment, followed by lectures about product installation (Emphasis is placed on piping and control wiring.) PowerPoint presentation and discussions will also cover charging and pre-commissioning tasks that must be completed before startup. During lab activities students will be introduced to LG SIM 2.0 (LG Monitoring View Software) which is the tool that must be used to evaluate equipment performance.
Prerequisites:
1) Advanced technical knowledge of Residential A/C, Heat Pump, and Air Distribution systems.
2) Basic working knowledge of Microsoft Office programs including Excel, Power Point and Word.
What to bring to class:
1) Laptop PC * running Windows Vista, 7, 8, 10 with a web browser of Internet Explorer 8.0
or higher with a minimum of Excel, Power Point, and Word installed.
*Students that want LGMV installed onto their PC
Duration: 8 hours
Meals: Lunch will be served
When to arrive and depart: Start and end times are subject to change for each academy. Please consult the calendar website for the timing of your particular course at time of registration. All other published times are always superseded by those listed in the course description on the website.
Cost: $75/Student. Billable to your K&E Distributing Account.
LG SIM 2.0 & LGMV:
Students that are interested in the LG SIMS 2.0 or LGMV PC version should reach out to their Representative or Distributor, for the correct LG SIMS 2.0 or LGMV kit to order.
Register Here
Course qualifies for 6 hours of HVAC/R Discipline continuing education credits with the Iowa Plumbing and Mechanical Board.
Lunch provided for day 1.
Preferred Lodging Options:
Stoney Creek Hotel & Conference Center
5291 Stoney Creek Ct.
Johnston, IA 50131
515-334-9000
Fairfield Inn & Suites Des Moines West
7225 Vista Dr.
West Des Moines, IA 50266
515-225-6100
At this time, our upcoming course will take place as planned. However, if you are sick or feeling you are getting sick, we ask that you please stay home. Currently, older adults and persons with underlying health conditions are considered to be at increased risk of severe illness and complications from COVID-19. Examples of underlying health conditions include heart disease, lung disease, diabetes, people with weakened immune systems, and people who are pregnant. The CDC recommends that people in high-risk groups consult with their healthcare provider about attending any large gathering.
If you do choose to attend DFS04, please keep in mind the CDC recommendations on how to keep yourself and others healthy:
Avoid close contact with people who are sick.
Avoid touching your eyes, nose, and mouth with unwashed hands.
Wash your hands often with soap and water for at least 20 seconds. Use an alcohol-based hand sanitizer that contains at least 60% alcohol if soap and water are not available.”

Climatemaster 202- Residential Installation and Service
2021-04-06 08:30 - 2021-04-07 12:00
This two day ClimateMaster class is designed for the dealer and the technician. The course gives dealer personnel the features/benefits, ratings, application & design, warranties, economics, and sales tips for ClimateMaster geothermal equipment.
Course qualifies for 11 hours of HVAC/R Discipline continuing education credits with the Iowa Plumbing and Mechanical Board.
Cost: $100/Student. Billable to your K&E Distributing Account.
Lunch provided for day 1, day 2 will end just before lunch.
Preferred Lodging Options:
Stoney Creek Hotel & Conference Center
5291 Stoney Creek Ct.
Johnston, IA 50131
515-334-9000
Fairfield Inn & Suites Des Moines West
7225 Vista Dr.
West Des Moines, IA 50266
515-225-6100
At this time, our upcoming Climatemaster Service and Installation course will take place as planned. However, if you are sick or feeling you are getting sick, we ask that you please stay home. Currently, older adults and persons with underlying health conditions are considered to be at increased risk of severe illness and complications from COVID-19. Examples of underlying health conditions include heart disease, lung disease, diabetes, people with weakened immune systems, and people who are pregnant. The CDC recommends that people in high-risk groups consult with their healthcare provider about attending any large gathering.
If you do choose to attend Climatemaster Service and Installation, please keep in mind the CDC recommendations on how to keep yourself and others healthy:
Avoid close contact with people who are sick.
Avoid touching your eyes, nose, and mouth with unwashed hands.
Wash your hands often with soap and water for at least 20 seconds. Use an alcohol-based hand sanitizer that contains at least 60% alcohol if soap and water are not available.”

Training for Honeywell Generator Contractors
2021-03-03 09:00, 2021-03-02 09:00 - 15:00
Profit Generator 1.0 Residential Standby
Register Today!
Includes all training materials. Participants receive a learner’s guide and sizing guide.
Grow your business by learning how to size, sell,
and install generators to your customers!
Agenda of Topics
• Residential Market Overview
• Site Preparation
• Fuel Considerations
• Back Up Options
• Transfer Switch Connections
• Generator Connections
• Operational Tests & Final Steps
• Sizing the Generator: NEC 220, Part IV
Cost: $100/Student. Billable to your K&E Distributing Account. Attendees will receive a $100 certificate towards the purchase of a Honeywell Generator from K&E after completion of this class
Lunch provided for day 1.
Preferred Lodging Options:
Stoney Creek Hotel & Conference Center
5291 Stoney Creek Ct.
Johnston, IA 50131
515-334-9000
Fairfield Inn & Suites Des Moines West
7225 Vista Dr.
West Des Moines, IA 50266
515-225-6100
At this time, our upcoming course will take place as planned. However, if you are sick or feeling you are getting sick, we ask that you please stay home. Currently, older adults and persons with underlying health conditions are considered to be at increased risk of severe illness and complications from COVID-19. Examples of underlying health conditions include heart disease, lung disease, diabetes, people with weakened immune systems, and people who are pregnant. The CDC recommends that people in high-risk groups consult with their healthcare provider about attending any large gathering.
If you do choose to attend our Honeywell training, please keep in mind the CDC recommendations on how to keep yourself and others healthy:
Avoid close contact with people who are sick.
Avoid touching your eyes, nose, and mouth with unwashed hands.
Wash your hands often with soap and water for at least 20 seconds. Use an alcohol-based hand sanitizer that contains at least 60% alcohol if soap and water are not available.”

Climatemaster 202- Residential Installation and Service
2021-02-24 08:30 - 16:00
This ClimateMaster class is designed for the dealer and the technician. The course gives dealer personnel the features/benefits, ratings, application & design, warranties, economics, and sales tips for ClimateMaster geothermal equipment.
Cost: $100/Student. Billable to your K&E Distributing Account.
Lunch provided for day 1, day 2 will end just before lunch.
Preferred Lodging Options:
Stoney Creek Hotel & Conference Center
5291 Stoney Creek Ct.
Johnston, IA 50131
515-334-9000
Fairfield Inn & Suites Des Moines West
7225 Vista Dr.
West Des Moines, IA 50266
515-225-6100
At this time, our upcoming Climatemaster Service and Installation course will take place as planned. However, if you are sick or feeling you are getting sick, we ask that you please stay home. Currently, older adults and persons with underlying health conditions are considered to be at increased risk of severe illness and complications from COVID-19. Examples of underlying health conditions include heart disease, lung disease, diabetes, people with weakened immune systems, and people who are pregnant. The CDC recommends that people in high-risk groups consult with their healthcare provider about attending any large gathering.
If you do choose to attend Climatemaster Service and Installation, please keep in mind the CDC recommendations on how to keep yourself and others healthy:
Avoid close contact with people who are sick.
Avoid touching your eyes, nose, and mouth with unwashed hands.
Wash your hands often with soap and water for at least 20 seconds. Use an alcohol-based hand sanitizer that contains at least 60% alcohol if soap and water are not available.”

Caleffi Hydronic Solutions
2020-11-17 13:00 - 16:00
Complimentary education for hydronic, plumbing and renewable energy professionals to aid them in system design, component application and selection.

DFS-10 Service Essentials
2020-11-11 08:30 - 16:30, 2020-09-30 08:30 - 16:30
DFS-10 Service Essentials
Who should attend? Employees and sub-contractors of our Representatives / Distribution partners who will be engaging in the service and repair of LG DFS air conditioning equipment.
What you will learn: You will become familiar with LG DFS equipment PCBs, EEVs, BLDC Motors, compressors and other components. On a modular level the student will learn the part each component plays in a correctly operating LG DFS system. Indoor and outdoor electrical connections and interrelationships will be discussed. Physical access to all major functional components will be covered along with practical guidance concerning the service and maintenance of LG DFS equipment.
How you will learn: The student will be guided through the steps of the troubleshooting process by means of classroom lecture and reinforcement of lessons by practical hands on exercises on live equipment in the lab. During lab activities students will use LG SIM 2.0 (LG Monitoring View Software) to evaluate and troubleshoot LG DFS equipment in lab activities.
Prerequisites:
1) Advanced technical knowledge of Residential A/C, Heat Pump, and Air Distribution systems.
2) Basic working knowledge of Microsoft Office programs including Excel, Power Point and Word.
Duration: 7 Hours of instruction
Meals: Lunch will be served
Cost: $150/Student. Billable to your K&E Distributing Account.
When to arrive and depart: Start and end times are subject to change for each academy. Please consult the calendar website for the timing of your particular course at time of registration. All other published times are always superseded by those listed in the course description on the website.
LG SIM 2.0 & LGMV:
Students that are interested in the LG SIMS 2.0 or LGMV PC version should reach out to their Representative or Distributor, for the correct LG SIMS 2.0 or LGMV kit to order.
Laptop PC * running Windows Vista, 7, 8, 10 with a web browser of Internet Explorer 8.0
or higher with a minimum of Excel, Power Point, and Word installed.
*Students that want LGMV installed onto their PC
Register Here
Course qualifies for 7 hours of HVAC/R Discipline continuing education credits with the Iowa Plumbing and Mechanical Board.
Lunch provided for day 1.
Preferred Lodging Options:
Stoney Creek Hotel & Conference Center
5291 Stoney Creek Ct.
Johnston, IA 50131
515-334-9000
Fairfield Inn & Suites Des Moines West
7225 Vista Dr.
West Des Moines, IA 50266
515-225-6100
At this time, our upcoming course will take place as planned. However, if you are sick or feeling you are getting sick, we ask that you please stay home. Currently, older adults and persons with underlying health conditions are considered to be at increased risk of severe illness and complications from COVID-19. Examples of underlying health conditions include heart disease, lung disease, diabetes, people with weakened immune systems, and people who are pregnant. The CDC recommends that people in high-risk groups consult with their healthcare provider about attending any large gathering.
If you do choose to attend DFS04, please keep in mind the CDC recommendations on how to keep yourself and others healthy:
Avoid close contact with people who are sick.
Avoid touching your eyes, nose, and mouth with unwashed hands.
Wash your hands often with soap and water for at least 20 seconds. Use an alcohol-based hand sanitizer that contains at least 60% alcohol if soap and water are not available.”

Climatemaster Trilogy Installation and Service
2020-11-03 08:00 - 2020-11-04 12:00
Overview of the product
Cover all 4 modes of operation
Discuss the hot water side and how it should not be used for hydronic applications and why
Go through the refrigerant schematic of all 4 modes discuss what is happening in those modes
Discuss all the refrigerant components
Talk about brazed plate heat exchangers and what needs to be watched on install
How an inverter works and the boards we use in the QE and VE units
Talk about the compressor two different ones based on the two sizes
Discuss this units capacities being fully variable and that it drives to that capacity regardless of the EWT
Discuss the smart hot water tank and it features
Talk about hot water capacities
Wiring up the unit high voltage as well as low voltage wiring
Optional zoning package go through the necessary parts as well as does and don’ts
The 3 sizes of the smart tank
Flushing this unit and the on board Grundfos sensors
Proper filtering of the loop fluid with the braze plate
Proper antifreeze protection discuss why it is so critical
I gate thermostat and how it is setup and connected to the internet with homeowner portal
Also discuss the contractor portal as well what can be seen remotely
Discuss the PC service tool and setup
Hands on operation of a working unit go through all modes the wholes class records different data during these modes of operation as well as everyone gets a chance making changes hands on to the unit. This is the half day portion.
Lunch provided for day 1.
Preferred Lodging Options:
Stoney Creek Hotel & Conference Center
5291 Stoney Creek Ct.
Johnston, IA 50131
515-334-9000
Fairfield Inn & Suites Des Moines West
7225 Vista Dr.
West Des Moines, IA 50266
515-225-6100
At this time, our upcoming course will take place as planned. However, if you are sick or feeling you are getting sick, we ask that you please stay home. Currently, older adults and persons with underlying health conditions are considered to be at increased risk of severe illness and complications from COVID-19. Examples of underlying health conditions include heart disease, lung disease, diabetes, people with weakened immune systems, and people who are pregnant. The CDC recommends that people in high-risk groups consult with their healthcare provider about attending any large gathering.
If you do choose to attend this class, please keep in mind the CDC recommendations on how to keep yourself and others healthy:
Avoid close contact with people who are sick.
Avoid touching your eyes, nose, and mouth with unwashed hands.
Wash your hands often with soap and water for at least 20 seconds. Use an alcohol-based hand sanitizer that contains at least 60% alcohol if soap and water are not available.”

Triangle Tube Boilers- Design and Installation
2020-10-14 09:00 - 15:30
Triangle Tube, an innovator and industry leader in the manufacture and supply of quality stainless steel hot water heating equipment, has been keeping families warm since 1946. Our strapline – The original innovators supports our history as the first to bring the fire tube heat exchanger to the residential market. Learn more about our story, our work, and stay up to date with Triangle Tube’s news!
The Applications and Installation class is a course that will teach you the essentials of the Triangle Tube Instinct boilers, including:
– Proper applications of the boiler
– Making the boiler condense
– Proper near boiler piping
– Electrical wiring interface
– Boiler control set-up
– Commissioning and Start-Up
– Combustion Analysis
– Basic Troubleshooting
– and Much More!

DFS-10 Service Essentials
2020-08-26 08:30 - 16:30
DFS-10 Service Essentials
Who should attend? Employees and sub-contractors of our Representatives / Distribution partners who will be engaging in the service and repair of LG DFS air conditioning equipmen

t.
What you will learn: You will become familiar with LG DFS equipment PCBs, EEVs, BLDC Motors, compressors and other components. On a modular level the student will learn the part each component plays in a correctly operating LG DFS system. Indoor and outdoor electrical connections and interrelationships will be discussed. Physical access to all major functional components will be covered along with practical guidance concerning the service and maintenance of LG DFS equipment.
How you will learn: The student will be guided through the steps of the troubleshooting process by means of classroom lecture and reinforcement of lessons by practical hands on exercises on live equipment in the lab. During lab activities students will use LG SIM 2.0 (LG Monitoring View Software) to evaluate and troubleshoot LG DFS equipment in lab activities.
Prerequisites:
1) Advanced technical knowledge of Residential A/C, Heat Pump, and Air Distribution systems.
2) Basic working knowledge of Microsoft Office programs including Excel, Power Point and Word.
Duration: 7 Hours of instruction
Meals: Lunch will be served
Cost: $150/Student. Billable to your K&E Distributing Account.
When to arrive and depart: Start and end times are subject to change for each academy. Please consult the calendar website for the timing of your particular course at time of registration. All other published times are always superseded by those listed in the course description on the website.
LG SIM 2.0 & LGMV:
Students that are interested in the LG SIMS 2.0 or LGMV PC version should reach out to their Representative or Distributor, for the correct LG SIMS 2.0 or LGMV kit to order.
Laptop PC * running Windows Vista, 7, 8, 10 with a web browser of Internet Explorer 8.0
or higher with a minimum of Excel, Power Point, and Word installed.
*Students that want LGMV installed onto their PC
Register Here
Course qualifies for 7 hours of HVAC/R Discipline continuing education credits with the Iowa Plumbing and Mechanical Board.
Lunch provided for day 1.
Preferred Lodging Options:
Stoney Creek Hotel & Conference Center
5291 Stoney Creek Ct.
Johnston, IA 50131
515-334-9000
Fairfield Inn & Suites Des Moines West
7225 Vista Dr.
West Des Moines, IA 50266
515-225-6100
At this time, our upcoming course will take place as planned. However, if you are sick or feeling you are getting sick, we ask that you please stay home. Currently, older adults and persons with underlying health conditions are considered to be at increased risk of severe illness and complications from COVID-19. Examples of underlying health conditions include heart disease, lung disease, diabetes, people with weakened immune systems, and people who are pregnant. The CDC recommends that people in high-risk groups consult with their healthcare provider about attending any large gathering.
If you do choose to attend DFS04, please keep in mind the CDC recommendations on how to keep yourself and others healthy:
Avoid close contact with people who are sick.
Avoid touching your eyes, nose, and mouth with unwashed hands.
Wash your hands often with soap and water for at least 20 seconds. Use an alcohol-based hand sanitizer that contains at least 60% alcohol if soap and water are not available.”

Climatemaster 202- Residential Installation and Service
2020-07-22 08:30 - 2020-07-23 11:30
This two day ClimateMaster class is designed for the dealer and the technician. The course gives dealer personnel the features/benefits, ratings, application & design, warranties, economics, and sales tips for ClimateMaster geothermal equipment.
Course qualifies for 11 hours of HVAC/R Discipline continuing education credits with the Iowa Plumbing and Mechanical Board.
Lunch provided for day 1, day 2 will end just before lunch.
Preferred Lodging Options:
Stoney Creek Hotel & Conference Center
5291 Stoney Creek Ct.
Johnston, IA 50131
515-334-9000
Fairfield Inn & Suites Des Moines West
7225 Vista Dr.
West Des Moines, IA 50266
515-225-6100
At this time, our upcoming Climatemaster Service and Installation course will take place as planned. However, if you are sick or feeling you are getting sick, we ask that you please stay home. Currently, older adults and persons with underlying health conditions are considered to be at increased risk of severe illness and complications from COVID-19. Examples of underlying health conditions include heart disease, lung disease, diabetes, people with weakened immune systems, and people who are pregnant. The CDC recommends that people in high-risk groups consult with their healthcare provider about attending any large gathering.
If you do choose to attend Climatemaster Service and Installation, please keep in mind the CDC recommendations on how to keep yourself and others healthy:
Avoid close contact with people who are sick.
Avoid touching your eyes, nose, and mouth with unwashed hands.
Wash your hands often with soap and water for at least 20 seconds. Use an alcohol-based hand sanitizer that contains at least 60% alcohol if soap and water are not available.”

DFS 04 - LG Excellence Hands-On Training/Opportunities Meeting DSM IA
2020-06-16 08:30 - 17:30
DFS-04 Installation Essentials

DFS-10 Service Essentials LG (DSM-IA) HVAC/R Discipline- 07 CEU Hours
2020-05-13 08:30 - 15:30
DFS-10 Service Essentials
HVAC/R Discipline- 07 CEU Hours with the State of Iowa
Who should attend? Employees and sub-contractors of our Representatives / Distribution partners who will be engaging in the service and repair of LG DFS air conditioning equipment.
What you will learn: You will become familiar with LG DFS equipment PCBs, EEVs, BLDC Motors, compressors and other components. On a modular level the student will learn the part each component plays in a correctly operating LG DFS system. Indoor and outdoor electrical connections and interrelationships will be discussed. Physical access to all major functional components will be covered along with practical guidance concerning the service and maintenance of LG DFS equipment.
How you will learn: The student will be guided through the steps of the troubleshooting process by means of classroom lecture and reinforcement of lessons by practical hands on exercises on live equipment in the lab. During lab activities students will use LG SIM 2.0 (LG Monitoring View Software) to evaluate and troubleshoot LG DFS equipment in lab activities.
Prerequisites:
1) Advanced technical knowledge of Residential A/C, Heat Pump, and Air Distribution systems.
2) Basic working knowledge of Microsoft Office programs including Excel, Power Point and Word.
Duration: 7 Hours of instruction
Meals: Lunch will be served
Cost: $150/Student. Billable to your K&E Distributing Account.
When to arrive and depart: Start and end times are subject to change for each academy. Please consult the calendar website for the timing of your particular course at time of registration. All other published times are always superseded by those listed in the course description on the website.
LG SIM 2.0 & LGMV:
Students that are interested in the LG SIMS 2.0 or LGMV PC version should reach out to their Representative or Distributor, for the correct LG SIMS 2.0 or LGMV kit to order.
Laptop PC * running Windows Vista, 7, 8, 10 with a web browser of Internet Explorer 8.0
or higher with a minimum of Excel, Power Point, and Word installed.
*Students that want LGMV installed onto their PC
Register Here

DFS 04 - LG Excellence Hands-On Training DSM IA
2020-05-12 08:30 - 15:30
DFS-04 Installation Essentials
Who should attend? Employees and sub-contractors of our Representatives / Distribution partners who will be engaging in field installation of LG DFS equipment.
What you will learn: The manufacturer’s guidelines for installing the piping and wiring systems connected to the indoor and outdoor LG DFS air conditioning equipment.
How you will learn: This class begins with a brief introduction to LG Inverter equipment, followed by lectures about product installation (Emphasis is placed on piping and control wiring.) PowerPoint presentation and discussions will also cover charging and pre-commissioning tasks that must be completed before startup. During lab activities students will be introduced to LG SIM 2.0 (LG Monitoring View Software) which is the tool that must be used to evaluate equipment performance.
Prerequisites:
1) Advanced technical knowledge of Residential A/C, Heat Pump, and Air Distribution systems.
2) Basic working knowledge of Microsoft Office programs including Excel, Power Point and Word.
What to bring to class:
1) Laptop PC * running Windows Vista, 7, 8, 10 with a web browser of Internet Explorer 8.0
or higher with a minimum of Excel, Power Point, and Word installed.
*Students that want LGMV installed onto their PC
Duration: 7 hours
Meals: Lunch will be served
When to arrive and depart: Start and end times are subject to change for each academy. Please consult the calendar website for the timing of your particular course at time of registration. All other published times are always superseded by those listed in the course description on the website.
Cost: $75/Student. Billable to your K&E Distributing Account.
LG SIM 2.0 & LGMV:
Students that are interested in the LG SIMS 2.0 or LGMV PC version should reach out to their Representative or Distributor, for the correct LG SIMS 2.0 or LGMV kit to order.
Register Here

MVS 98 - Installation and Commissioning (DSM-IA) (CANCELLED DUE TO COVID-19 EPIDEMIC)
2020-04-15 08:30 - 2020-04-16 11:30
Multi V S Installation and Commissioning
Who should attend? Employees and sub-contractors of our Representative or Distributor partners who will be engaging in field installation and commissioning of LG Multi V S equipment.
What you will learn: The manufacturer’s guidelines for installing the piping and wiring systems connected to the indoor and outdoor LG Multi V S air conditioning equipment. Also, the practical skills necessary to perform an external authorized commissioning of LG Multi V S systems. Special focus will be spent on understanding how to use LGMV for the commissioning process.
How you will learn: This class begins with a brief introduction to LG Electronics followed by lectures about product installation (Emphasis is placed on piping and control wiring.) Consideration and discussions covering pre-commissioning tasks that must be completed. The student will be guided through the steps of the commissioning process by classroom lecture and reinforcement of lessons by practical exercise in our live equipment lab. During lab activities students will be introduced to LGMV (LG Monitoring View Software) which is the tool that must be used to evaluate equipment performance.
Prerequisites: 1) Advanced technical knowledge of commercial A/C, heat pump, and applied systems. 2) Basic working knowledge of Microsoft Office programs including Excel, Power Point and Word. 3) Latest version of LATS must be installed on your PC – you can obtain LATS from your local Rep. 4) Latest version of LGMV software must be installed on your computer.
Duration: 1.5 Days Meals: Lunch will be served the first day
Cost: $150/Student. Billable to your K&E Distributing Account.
When to arrive and depart: Start and end times are subject to change for each academy. Please consult the calendar website for the timing of your particular course at time of registration. All other published times are always superseded by those listed in the course description on the website.
Students should contact their REPRESENTATIVE to order the LGMV software and cable – PRCTSL1 and PRCTFE1 LGMV Kit the LGMV cable and installation software are now also conveniently bundled into a single package for ordering. • PRCTIL0 – Cable and installation software; combines PRCTFE1 and PRCTSL1.Multi V S Installation and Commissioning
Register Here

DFS 04 - LG Excellence Hands-On Training/Opportunities Meeting DSM IA (CANCELLED DUE TO COVID-19 EPIDEMIC)
2020-04-14 08:30 - 17:30
DFS-04 Installation Essentials
Who should attend? Employees and sub-contractors of our Representatives / Distribution partners who will be engaging in field installation of LG DFS equipment.
What you will learn: The manufacturer’s guidelines for installing the piping and wiring systems connected to the indoor and outdoor LG DFS air conditioning equipment.
How you will learn: This class begins with a brief introduction to LG Inverter equipment, followed by lectures about product installation (Emphasis is placed on piping and control wiring.) PowerPoint presentation and discussions will also cover charging and pre-commissioning tasks that must be completed before startup. During lab activities students will be introduced to LG SIM 2.0 (LG Monitoring View Software) which is the tool that must be used to evaluate equipment performance.
Prerequisites:
1) Advanced technical knowledge of Residential A/C, Heat Pump, and Air Distribution systems.
2) Basic working knowledge of Microsoft Office programs including Excel, Power Point and Word.
What to bring to class:
1) Laptop PC * running Windows Vista, 7, 8, 10 with a web browser of Internet Explorer 8.0
or higher with a minimum of Excel, Power Point, and Word installed.
*Students that want LGMV installed onto their PC
Duration: 7 hours
Meals: Lunch will be served
When to arrive and depart: Start and end times are subject to change for each academy. Please consult the calendar website for the timing of your particular course at time of registration. All other published times are always superseded by those listed in the course description on the website.
Cost: $75/Student. Billable to your K&E Distributing Account.
LG SIM 2.0 & LGMV:
Students that are interested in the LG SIMS 2.0 or LGMV PC version should reach out to their Representative or Distributor, for the correct LG SIMS 2.0 or LGMV kit to order.
————————————————————————————————————————————————————————————————-
LG Excellence Contractor Program:
The LG Excellence Contractor Program is a comprehensive training and contractor recognition program designed to assist independent HVAC Contractors in selling, installing, and servicing LG Home Comfort Solutions and Light Commercial systems. Upon successful completion of the program, Contractors will receive advanced recognition and incentives to set themselves apart from their competitors in their respective market areas.
To obtain the LG Excellence status, Contractors must complete a series of one-hour LMS Core Training Courses, as well as a full-day installation and service training course (DFS 04 Qualifies) that MUST be taken at an LG Training Academy or an LG approved field training location.
Duration: 2 hours
Must have a Schoox account to register. Please click Register Here button below.

Register Here

DFS-10 Service Essentials LG (DSM-IA) HVAC/R Discipline- 07 CEU Hours
2020-03-11 08:30 - 15:30
DFS-10 Service Essentials
HVAC/R Discipline- 07 CEU Hours with the State of Iowa
Who should attend? Employees and sub-contractors of our Representatives / Distribution partners who will be engaging in the service and repair of LG DFS air conditioning equipment.
What you will learn: You will become familiar with LG DFS equipment PCBs, EEVs, BLDC Motors, compressors and other components. On a modular level the student will learn the part each component plays in a correctly operating LG DFS system. Indoor and outdoor electrical connections and interrelationships will be discussed. Physical access to all major functional components will be covered along with practical guidance concerning the service and maintenance of LG DFS equipment.
How you will learn: The student will be guided through the steps of the troubleshooting process by means of classroom lecture and reinforcement of lessons by practical hands on exercises on live equipment in the lab. During lab activities students will use LG SIM 2.0 (LG Monitoring View Software) to evaluate and troubleshoot LG DFS equipment in lab activities.
Prerequisites:
1) Advanced technical knowledge of Residential A/C, Heat Pump, and Air Distribution systems.
2) Basic working knowledge of Microsoft Office programs including Excel, Power Point and Word.
Duration: 7 Hours of instruction
Meals: Lunch will be served
Cost: $75/Student. Billable to your K&E Distributing Account.
When to arrive and depart: Start and end times are subject to change for each academy. Please consult the calendar website for the timing of your particular course at time of registration. All other published times are always superseded by those listed in the course description on the website.
LG SIM 2.0 & LGMV:
Students that are interested in the LG SIMS 2.0 or LGMV PC version should reach out to their Representative or Distributor, for the correct LG SIMS 2.0 or LGMV kit to order.
Laptop PC * running Windows Vista, 7, 8, 10 with a web browser of Internet Explorer 8.0
or higher with a minimum of Excel, Power Point, and Word installed.
*Students that want LGMV installed onto their PC
Register Here
