ClimateMaster Residential Installation & Service Training

University Of Wisconsin OshKosh A-219 Henken Room, Fond du Lac, WI, United States

This ClimateMaster geothermal class is designed around installation and application best practices. Covering heat of extraction/rejection, refrigeration practices & diagnostics, controls (including DXM 2.5 installer set up), operation and troubleshooting, iGate 2.0 platform, loop flushing and proper antifreeze practices, pumps and all 4 loop applications including water quality. $299 per first registered attendee from each […]

$299

**CLASS FULL**Climatemaster Trilogy Installation and Service Dallas Center IA

Gordon Peterson Training Academy 400 15th St, Dallas Center, IA, United States

*****CLASS FULL AS OF 9/11/2023***** During this course you will: Overview of the product Cover all 4 modes of operation Discuss the hot water side and how it should not be used for hydronic applications and why Go through the refrigerant schematic of all 4 modes discuss what is happening in those modes Discuss all […]

$200

Canceled LG DFS-04; Installation Essentials (Dallas Center)

Gordon Peterson Training Academy 400 15th St, Dallas Center, IA, United States

Attend this class to become familiar with all basic guidelines for single and multi-zone systems. Emphasis on components that may be different from those found in unitary equipment, and proper logical approach to troubleshooting. Proper utilization of the supply chain, LG TSA program and LG Technical and Product Support. ***Note: The same person must successfully […]

$100

Canceled LG DFS-10; Service Essentials (Dallas Center)

Gordon Peterson Training Academy 400 15th St, Dallas Center, IA, United States

Attend this class to become familiar with LG DFS equipment, parts and components. On a modular level, learn how each component operates in the LG DFS system. Indoor and outdoor electrical connections and interrelationships will be discussed. Physical access to all major functional components will be covered along with practical guidance concerning the service and […]

$100

ClimateMaster Residential Installation & Service Training- NE

The Archway 3060 E 1st St, Kearney, NE

This ClimateMaster geothermal class is designed around installation and application best practices. Covering heat of extraction/rejection, refrigeration practices & diagnostics, controls (including DXM 2.5 installer set up), operation and troubleshooting, iGate 2.0 platform, loop flushing and proper antifreeze practices, pumps and all 4 loop applications including water quality. Participants MUST bring a tablet or laptop […]

$250

ClimateMaster Residential Installation & Service Training- IA ****CLASS FULL****

Gordon Peterson Training Academy 400 15th St, Dallas Center, IA, United States

This ClimateMaster geothermal class is designed around installation and application best practices. Covering heat of extraction/rejection, refrigeration practices & diagnostics, controls (including DXM 2.5 installer set up), operation and troubleshooting, iGate 2.0 platform, loop flushing and proper antifreeze practices, pumps and all 4 loop applications including water quality. Participants MUST bring a tablet or laptop […]

$250

EcoFOREST Installation & Service Training- IA

Gordon Peterson Training Academy 400 15th St, Dallas Center, IA, United States

This Ecoforest geothermal class will provide product overview, installation, and service basics on variable speed water-to-water products. Participants MUST bring a tablet or laptop to interact with classroom materials. $200 for each attendee billed by K&E Distributing. Lunch will be provided. Preferred Lodging Options: TownPlace Suites by Marriott Des Moines-Urbandale 8800 Northpark Dr. Johnston, IA […]

$200

ClimateMaster Residential Installation & Service Training- MN/WI

Fish House at Altoona City Park 418 9th Street W, Altoona, MN, United States

This ClimateMaster geothermal class is designed around installation and application best practices. Covering heat of extraction/rejection, refrigeration practices & diagnostics, controls (including DXM 2.5 installer set up), operation and troubleshooting, iGate 2.0 platform, loop flushing and proper antifreeze practices, pumps and all 4 loop applications including water quality. Participants MUST bring a tablet or laptop […]

$250